This equipment is designed for operation in the premises under extra hard conditions: increased dustiness, air-suspended aggressive particles, exposure to corrosion. The design solutions applied in this series to a great extent contribute to the safety of operation and increase the unit’s life time. PROTON GUARD sets the new standard of industrial air heater due to a number of progressive techniques: special casing structure, heat exchanger with polymeric protective coating, increased thickness of lamellas and widened inter-lamella intervals.

ECP 220 Programmable controller
- Programmability of temperature mode with accuracy up to 0.5 °C.
- Automatic or manual modes of control of rotation speed of a EC motor/a group of EC motors.
- Week programmability 5+1+1.
- Can be used with RC 30 remote controller.
- Possibility to connect thermal sensor NTC 65.
- High level of energy savings.
- Reduction of noise.
- Protection against indoor temperature drop lower than critical level.
- Operation at heating and cooling modes.
- MODBUS protocol.
- Possibility to control two- or three-way valves.
- Easy to install.

- Regulation of heat medium supply in automatic mode from a controller or thermostat.
- Accurate control of heat medium flow.
- Energy savings.
- Protection grade IP54.
- Effective hydraulic regulation of the heat supply system.

- Checks indoor temperature and sends data to a controller.
- High accuracy.
- Possibility to connect a number of sensors for large buildings.
- Possibility to use in explosive buildings.

RTS 30 Programmable controller
- Programmability of temperature mode with accuracy up to 0.5 °C.
- Automatic and manual modes of control of rotation speed of three-speed AC-fan.
- Week programmability 5+1+1.
- Can be used with RC 30 Remote controller.
- Possibility to connect thermal sensor NTC 65.
- High level of energy savings.
- Reduction of noise.
- Protection against indoor temperature drop lower than critical level.
- Operation at heating and cooling modes.
- MODBUS protocol.
- Possibility to control two- or three-way valves.
- Easy to install.

- Regulation of three-speed AC-fan.
- Fast heating.
- Control of required temperature.
- Energy savings.
- Easy to use.
- Convenient control of temperature with 1*C accuracy.
- Noise reduction.

SRV Two-way valve with actuator
- Regulation of heat medium supply in automatic mode from a controller or thermostat.
- Accurate control of heat medium flow.
- Energy savings.
- Protection grade IP54.
- Effective hydraulic regulation of the heat supply system.

- Accurate temperature measurement due to the capillary mechanism.
- Possibility to operate under conditions of low temperature (up to 0 °C).
- Possibility to operate in moisture and aggressive environments.
- Possibility of direct commutation with electronically dependent devices.

- Checks indoor temperature and sends data to a controller.
- High accuracy.
- Possibility to connect a number of sensors for large buildings.
- Possibility to use in explosive buildings.

- Ease of adjustment and accurate control.
- Can provide control of up to 9 air heaters.
- High efficiency.
- Protection grade IP54.

Mounting console СM 3D
Light-weight, functional, and robust revolving mounting console CM 3D is made of carbon steel with thickness of 2 mm and covered by high-quality powder paint. It provides simple and fast installation of the air heater, mounting the latter under several angels on the wall and under the ceiling, as well as enables rotation of the air heaters 180 degrees about its vertical axis. Safe load on the console is 100 kg. The console is applicable to any bearing surface. The console guarantees safe use of air heating equipment PROTON.

The tray is designed to collect and discharge condensate while the unit operates in cooling mode. It provides possibility of fast and simple installation.