The 60kW and 110kW biomass hot air generator systems is the new addition to Camino Design's extensive biomass heating product range and is set to revolutionize the industry. From large to small facilities, the biomass hot air generator system provides large volume spaces of heating and air blower combination.

Designed with efficiency in mind, this unique environmentally friendly heating system is extremely quick and easy to install with minimal disruption to a business premises.

Reliable, renewable and competitively priced, the biomass hot air generator system comes ready with a reliable heat exchanger. It is versatile too, which means that you have a choice of places on where to site it within your premises.

The system benefits from low noise output, low operational costs and can also be programmed for many days, giving you peace of mind on how it's working within your premises when you are not present

1. Patented combustion system of a moving grate made of high quality cast iron (GG-20) and scrapping/stirring mechanism for the complete incineration of the fuel and successfully ash residues removal

2. Bimetallic combustion chamber made of stainless steel AISI 304 coated with cast iron plates at the points of contact of the flame with the walls that ensures very high resistance to chemical processes and temperatures developed in the combustion chamber.

3. Automated supply system equipped with a safety device which maintains the continuous seal between the stocking device and the fuel line and prevents the back flow in the fuel line and the fuel tank (Back burn Protection Starvalves System, BPS).

4. New generation dual fuel feed engines, with high performance and very low power consumption which complying with all the European directives.

5. Large capacity fuel chambers of 27 kg (the primary on the upper part) and 203 kg (the secondary, on the lower part), which ensure huge fuel autonomy.

6. Hot air heat exchanger with steel tubes of dual route and dense braid for maximum heat absorption.

7. Quick access doors allow for easy inspection of the combustion chamber, increasing the uptime and reliability of the unit. The combustion chamber as well as heat exchanger can be easily opened for routine inspection and maintenance by simply opening the doors.

8. Electronically controlled flue gas fan with speed sensor (hall sensor) for the correct adjustment of the intensity of combustion and exhaust through the chimney preventing the accumulation of smut and the unwanted blockage in the heat exchanger.

9. Single centrifugal fan air supply of 5.500 m³/h

10. Hot air outlet adjustable grilles with the option of magnitude and direction of air flow

11. Boiler wheel bearing system which gives flexibility to the hot air generator to be installed at any point

Automation & Closed Controls

 

PelleTech 60/110 Aero systems have a digital controller for setting temperature, feed cycle, auto ignition, flame retention mode etc. Thus, these machine systems require minimum manual intervention and provide ease of operation

1. Smoke Collectors

 

 Smoke collectors with doors for cleaning and inspection allow easy access and maintenance of the unit, with quick reach of the thermal delivery system.

2. Access Doors

 

 Quick access doors allow for easy inspection of the combustion chamber, increasing the uptime and reliability of the unit. The combustion chamber as well as heat exchanger can be easily opened for routine inspection and maintenance by simply opening the doors.

4. Exhaust & Exhaust Temperature

 

 This design has an electronically controlled flue gas fan with speed sensor (hall sensor) for the correct adjustment of the intensity of combustion and exhaust through the chimney preventing the accumulation of smut and the unwanted blockage in the heat exchanger. It is installed at the exhaust to remove the fuel gases and also to prevent generation of undue pressure inside the machine.

An exhaust temperature sensor connected to the main control ensures additional protection & safety.

6. Design

 

  The horizontal transverse fire tube structure provides best thermal efficiency, fast

heating and ease of maintenance as against the old traditional design having less efficiency, difficult maintenance and shorter product life.

5. Long Lasting Autonomy

 

  The PelleTech 60/110 Hot air generators are equipped with two (2) integrated fuel storage hoppers, a fact which gives to the generators the benefit of the long lasting autonomy and the uninterrupted fuel supply. The Lower hopper has a capacity of 203 kg of pellets and with the assistance of a mechanical fuel transferring system (composed by a motor of low power consumption and an auger), feeds the upper hopper (capacity of 23 kg). The feeding mechanism is actuated when the upper fuel’s chamber level reaches the 30% of its capacity.